| System | |
| Operation system | Linux |
| Online visitor | Support 4 visitors online at the same time |
| Collection | |
| Processor | T31ZL 1.5GHZ |
| Processor Memory | 512Mb |
| Sensor performance | Support Automatic white balance, Automatic gain control, Automatic backlight compensation |
| Image Capture | |
| Image sensor | GC2063, 2MP,1/2.9 CMOS (pixel optional, PCB compatible) |
| Minimum illumination | 0.8Lux/F1.４ (Color mode), 0.3Lux/F1.4 (B&W mode) |
| Lens/Viewing Angle | Standard lens 4mm，1G3P， IR-CUT integrated / D110 ° diagonal |
| Night vision | Dual light sources, Full color day & night; 2 pcs IR LED lights+2 pcs LED lights |
| Video | |
| Bit Rate/Maximum frame rate | CBR / VBR two rate control modes, and the output rate range is 128 ~ 4096kbps |
| Image adjustment | Brightness, contrast, vertical, horizontal adjustable, OSD display |
| IR control | IR turned on-- the Night vision ON; IR, ICR automatic detection; IR turned off-- the Night vision function disabled/ IR always OFF, ICR is fixed in the Day vision mode |
| Audio | |
| Input | Built-in - 38dB microphone |
| Output | Built-in 8 Ω 2W speaker |
| Sampling frequency / width | 8KHz/16bit |
| Compression standard | H.264+/MJPEF/JPEG |
| Network | |
| Protocols | TCP/IP,HTTP,TCP,UDP,DHCP,DNS,NTP,P2P，IPV4 etc |
| Wireless LAN Frequency | 2.4~2.4835GHz |
| Wireless LAN security | 64/128-bit WEP/WPA-PSK/WPA2-PSK data encryption |
| Memory | |
| Memory function | Support T-Flash card (up to 256GB) |
| Alarm | |
| Alarm Trigger | Support PIR human detection; Detection distance: 8m |
| Physical Environmental | |
| Rated voltage | DC5V±5% |
| Power consumption | Sleep current 500uA, Working current: 390mA |
| Power supply | Comes with 15000mAh battery power supply,3*21700 battery, supports external 5V solar panels |
| Weight | Gross weight: TBD (Note: in kind prevail) |
Tags:
Vstarcam CB11